24/7 callout across Hong Kong · Safe opening from HK$750

Professional Express Safe Opening Team

Expertise in every major Hong Kong safe brand · Professional unlocking technique

  • Non-destructive technique
  • Contents fully intact
  • Free WhatsApp photo quote
On Sum Lock locksmith opening an ONNAIS electronic safe with pure technique — no drilling, no damage to the door
On-site footage: locksmith working on an ONNAIS electronic safe with pure technique — not a single hole drilled

Valuable Assets Locked In? Common Safe Failures We See Daily:

The three scenarios below account for the vast majority of our safe opening callouts — and each has its own non-destructive solution.

Case 01

Flat Battery & Lost Emergency Key

Mostly seen in homes. The safe runs completely flat after long periods of non-use, and the supplied physical emergency key has been lost or accidentally locked inside — leaving no way in via temporary power or the physical key.

Case 02

Display Shows "OPEN" But the Handle Won't Turn

A purely mechanical fault, most common on office or institutional document safes. The digital display is fine and the correct code is accepted with a beep and "OPEN", but the knob or handle won't turn — the internal mechanism has seized.

Case 03

"Gravity Deadlock" Triggered by Relocation

Many shops and offices find their safe won't open after a renovation or move — even with the correct code and key. Mid-to-high-end safes have an anti-burglary gravity deadlock safety device that trips on severe shocks or angled impacts during transport, permanently locking the bolt mechanism.

From home electronic safes to hotel guest-room boxes, from bolt obstructions to structural deadlocks — all handled with pure technique, leaving the door and panel fully intact.

We Know the Structure Inside Out — Professional Safe Decoding

On Sum Lock has provided professional safe opening services in Hong Kong for many years, building up extensive hands-on experience. We maintain close technical exchanges with several top mainland safe manufacturers, studying the internal schematics of anti-theft chips, gravity deadlock bolt mechanisms and the latest internal deadlock designs.

Over the years our team has worked on nearly every mainstream safe brand in the local market, with deep knowledge of their internal defences and common failure modes. Whether it's Safewell, Anbea, YALE or any imported or local brand, we can precisely target the failure point based on each safe's structural characteristics — and if you're thinking of upgrading or adding a new anti-theft safe, we're always happy to advise on model selection.

Non-Invasive or Minimal Drilling

We can pinpoint the safe's weak points with precision. For pure internal lock faults or deadlock components, most jobs need only a tiny micro-hole — or none at all — to open quickly and smoothly.

Contents Fully Intact

We rely purely on physical locksmith technique to defeat the outer lock. Our commitment: no matter how challenging the job, all documents, cash and valuables stored inside remain 100% intact.

Trusted Across the Industry

Besides everyday emergency callouts for residential customers, we provide long-term engineering support to public bodies, schools, government departments, banks and security-conscious jewellers and watch shops across Hong Kong.

All Major Safe Brands Handled — Extensive Experience

We understand the design differences between mainstream safe brands, from home electronic safes to commercial heavy-duty vaults — professional, reliable opening backed by years of hands-on experience and trusted by our customers.

Real-World Safe Opening Case Studies:

From private vaults in luxury residences to large office document safes — every case is a genuine record of non-destructive opening.

Mid-Levels Luxury Residence Safe Opening

Mid-Levels residential case: we successfully opened a high-security imported digital safe for the owner. Drawing on deep structural experience, we delivered a discreet, secure opening and the valuables were recovered safely.

Read the full case

Tai Wai Festival City Home Safe Opening

A common case in mid-market estates: an electronic safe failed after a long period without a battery change, leaking and damaging the circuitry — and the original emergency key was lost. Our locksmith arrived quickly and opened it within 10 minutes; the customer was delighted.

Read the full case

Commercial Office Large Safe Deadlock Fault

A large office document safe tripped its internal anti-burglary gravity deadlock after severe vibration during a move or renovation. Our master locksmith precisely located the mechanism and opened it without damaging the important contracts inside.

Commercial support capability

Our Master Locksmith Answers:

Buying, maintenance, post-opening follow-up — honest advice from years of on-site experience.

What structural features should I look for when buying a new anti-theft electronic safe?
From years of on-site repair and unlocking in Hong Kong, two points matter most if you don't want to get permanently locked out when the safe ages:

1. It must have a physical emergency keyhole: when choosing an electronic code safe, look for a model that retains an external physical emergency keyhole. If the electronics fail — from humidity or battery leakage — you can still open it manually with the physical key.
2. Choose a model where the key directly drives the bolt: some models require turning a round knob or pulling a handle after entering the code. Those internal linkages are relatively weak and loosen out of alignment over time. A model where the large key is inserted and turns the bolt via a hard mechanical linkage is the strongest and most durable construction.

If you're buying a new safe, we're happy to advise on model selection.
What are the key rules for daily safe maintenance and storage to avoid "human-error deadlocks"?
Most locked-safe calls are not caused by a wrong code but by poor everyday habits that jam the mechanism. Remember these golden rules:

1. Replace batteries on schedule: every six to twelve months, replace all batteries with fresh premium alkaline cells. Never mix old and new, and never leave a safe on its last bar — leakage can corrode the electronics.
2. Keep the physical backup key separate and safe: never leave the supplied emergency key locked inside the safe. Store it at the office, at another property, or with a trusted friend or relative.
3. Never overfill: one of the most common causes! When cash, gold or documents are stacked too full, closing the door pushes against the bolt mechanism and jams it, so the motor cannot turn. Leave 10–20% headroom at the top.
4. Avoid items with cords or tags: when storing items in the safe, avoid protective bags with fine cords, hanging tags or long zipper pulls. When the door is closed or items shift, these can silently wrap around and jam the bolt mechanism. Once jammed, even a correct code won't move the mechanism.
If I've lost the main key or a part is stuck, can you replace the lock after opening? How do I get an accurate quote?
Yes. After we open your safe with professional micro-drill or non-destructive technique, we can replace the lock with a new anti-theft set and cut new emergency keys on the spot if you've lost the original. For office safes with a mechanical part failure, we also provide repair and reset service. To get an accurate quote, simply send close-up photos of the front keypad, keyhole and handle via WhatsApp — we'll diagnose remotely based on structural experience and give you an honest fixed price with no hidden charges.

Safe Won't Open? Send a Photo, Get a Quote Instantly

Send close-ups of the front keypad, keyhole and handle via WhatsApp — we'll diagnose remotely based on structural experience and give you a fixed price with no hidden charges.

5222 7111